Instruction manual

Station Features
Conferencing
102 Strata DK General Description 6/00
Conferencing
A variety of Conferencing combinations are available to all station users, as listed below. Stations
and lines can be added in any order. (See “Amplified Conference Interface (DK40i, DK424i only)”
on Page 66)
♦ One or two stations and two outside lines
♦ Two or three stations and one outside line
♦ Four stations on one internal [DN] line
♦ Three to four simultaneous Conference calls (Table 38 on Page 95).
♦ Voice Mail plus one station and two other parties (internal or outside line for DK424i, Release
3.2 and above. (Outside line must be analog, not digital.)
Continuous Dual-tone Multi-frequency (DTMF) Tone
The DTMF dial signal sent to an outside line or voice mail/auto attendant device can continue as
long a DKT2000-series digital telephone user presses a button on the dial pad. This feature is not
available with electronic or DKT1000-series digital telephones.
Data Call Button
A flexible button on a digital telephone can be assigned as a 'DWD&DOO button, which can be used
to dial internal data calls. The telephone must be equipped with an RPCI-DI for
'DWD&DOO button
applications.
Direct Station Selection (DSS) Buttons
Digital telephone users can ring selected stations by pressing a flexible feature button assigned for
a DSS function. The LED associated with the button provides the busy status of the station and the
station’s [PDN]. Each flexible button can be assigned as a DSS button to a different station [PDN].
DSS buttons can also be assigned on DADMs.
Direct Station Selection (DSS) Console Features
On DK40i, DK424i, digital and electronic telephones can operate with DSS consoles, which offer
the following features:
♦ Automatic CO line Hold
♦ Feature buttons
♦ All Call Voice Page
♦ Outside Line access buttons
♦ DSS with busy LED indication
♦ Night Transfer
♦ Speed Dial
♦ Voice First or Tone Signaling
♦ Call Forward Override