Instruction manual

Station Features
Call Pickup Groups
Strata DK General Description 6/00 101
♦ Door phone calls
♦ Incoming CO line calls
♦ Parked calls
♦ Any ringing line or designated Tenant Group lines
♦ Tandem CO line connections (by tandem origination telephone)
Call Pickup Groups
Up to 20 Call Pickup groups can be created to enable station users to pickup calls ringing at other
stations with the touch of a Pickup feature button or by dialing brief access codes.
Station users can pick up a call that is ringing or transferred to any station in their own group with
a single access code or feature button, and can pickup calls ringing stations in other groups with
selected codes. Any station can be in all the different pickup groups.
Call Transfer with Camp-on
A station user can transfer a CO, DID, or Tie line or internal call to a busy station, which will
receive an alert tone indicating that a call is camped-on. If the busy station fails to answer, the
camped-on call will recall the transferring station.
A camp-on tone is also sent to electronic or digital telephones that are busy and that do not have an
idle [DN] or
/LQH button to receive the call. Camp-on tone consists of two tone bursts, followed
by silence. It can be enabled or disabled for each individual station.
Call Transfer Immediate
For Digital LCD telephones: If the Feature Prompting Soft Key is used to transfer a call, the call
immediately transfers after the last digit of the destination is dialed. If the called station is not
available or is busy, the call automatically camps-on to it. This feature is helpful to people who
process a large number of calls with no time to wait for transferred calls to be answered.
Call Transfer Music or Ringing Option
This feature enables ringing or music to be heard by the caller when a call is transferred,
depending on system programming. Prior to Release 3.2, callers heard music during the transfer
process and no ringing option in programming was available.
Call Transfer Recall
CO, DID, or Tie lines that are transferred (internally or over Tie lines) will recall to the transferring
station if the called station does not answer. The recall time is individually set for each transferring
station.
Centrex/PBX Features
System Speed Dial buttons can be programmed with access codes, plus any flashes or pauses
necessary to access features through a host switching system.