Instruction manual

Station Features
Call Park Orbits
100 Strata DK General Description 6/00
Fixed
Calls to the [PDN] or private CO line of an idle or busy digital or electronic telephone in this mode
will forward immediately to a destination assigned in system programming, but not as defined by
the telephone user.
External Call
Users can set their stations to forward incoming calls (on private or DID lines) to numbers outside
the DK System. The forwarding destination can be cancelled or changed to another outside
number or an internal voice mailbox (either remotely via DISA or from the user’s telephone,
security code protected). Internal, Tie line, and transferred calls will not call forward externally,
but can forward internally if another Call Forward mode is set simultaneously with Call Forward-
external.
Note Call Forwarding can be set for [PDNs] and [PhDNs] individually, with the exception of
Call Forward External and fixed Call Forward which applies only to [PDNs].
Call Park Orbits
The Call Park feature enables a station user to place a call temporarily in an orbit so that the call
can be retrieved by any user, either from the same station or from a different station. There are 20
General Park Orbits for the system and one Personal Park Orbit for each station. Personal Park
Orbits are available to any type of telephone, including standard telephones.
If a call is parked, but not retrieved within a preprogrammed time period, it will recall the parking
telephone. The Park recall time is set individually for each station.
Park and Page
This feature enables a user to park a call (in a General or Personal Park Orbit), enter a Page Zone
or Group access code, and then announce the orbit number of the waiting call to the Paged party. A
pre-programmed flexible button can be assigned to telephones to automatically connect to a
predesignated External Paging circuit, a Telephone Paging group or both.
Auto Park
This feature is only available to LCD telephones. When a telephone user parks a call, the user can
enter
 instead of a specific Orbit Number. The system will then automatically select the next
available General Park Orbit and park the call. The parking telephone’s LCD will show the Park
Orbit that has been automatically selected for the parked call.
Call Pickup
By pressing a button or by going off-hook and dialing an access code, any station can pick up the
following type of calls:
♦ [PDN] or [PhDN] calls on hold or ringing at other stations
♦ CO/DID/Tie lines calls ringing at other stations, either all lines or designated lines. (See
“Tenant Service” on Page 90.)
♦ External or Station Group Page
♦ CO line ringing during the Night mode over External Page or night bell