User guide

Features
Off-hook Call Announce
46 Strata DKT2104-CT Cordless Digital Telephone 01/02
Responding to a Lit Msg LED
1. Press 0VJ, then lift the handset. Your phone rings the extension or voice mail
device that sent the indication. The LED continues to flash red.
2. After answering the message(s), place the handset back on-hook.
3. If the Msg LED continues to flash, you have more messages; repeat Steps 1~3
above to retrieve them. Voice mail devices turn off the LED/LCD indications after
a short delay, after you checked all messages.
4. To manually turn off your Msg LED, press your extension button, then press
. Do this step for each message received.
Off-hook Call Announce
Off-hook Call Announce (OCA) allows you to complete a call to a busy digital
telephone. Your telephone must be programmed to either announce automatically or to
announce after you press a button on your dial pad. The destination telephone must be
programmed to accept an OCA. The announcement may be delivered over the handset
or the speaker.
Handset OCA can operate on any digital telephone. Speaker OCA requires the
addition of a special circuit board inside the DKT speakerphone.
➤ To make an OCA call
➤ Manual – Dial an extension. When you hear busy tone, press  and, after one long
tone, you can talk through the speaker of the destination telephone. The person you
are calling has answering options described below.
➤ Automatic – If your telephone and the extension you are calling have been
programmed for Automatic OCA, you can talk through the speaker of the
destination telephone without hearing the busy tone and without dialing
.