User guide

Features
Call Forward
Strata DKT2104-CT Cordless Digital Telephone 01/02 33
• Call Forward Cancel – Cancels the set Call Forward feature. Notice that each
category of Call Forward has a different code for canceling.
Station Call Forward Procedures
The following table contains Call Forward Button sequences. You can do a Call
Forward function by entering the button sequence as described.
Some Call Forward features require a Pass Code entry. Use the following procedure to
change your Pass Code.
➤ To change your Pass Code
➤ Press Extension button + + ext. no. + old Pass Code (1~15 digits) + + new
Pass Code (1~15 digits) +
.
➤ To use the Call Forward button sequence
➤ Follow the instructions in the following table, shown under “Button Sequence.”
Some features require additional input, such as:
• Destination – If the destination is an outside number, press
after entering the
destination. The CTX accepts destination numbers of up to 32 digits.
• Timer – This is a two digit entry representing how long (8 to 160 seconds) your
telephone should ring before forwarding the call. If you enter one digit, you
must press
after entering the single digit.
• Pass Code – A four-digit code established by system programming to prevent
unauthorized changes. The code applies to the station to be forwarded; not to
the station entering the code.
Note In the following table, (Tone) means that a confirmation tone will play at that
point in the sequence.
Table 3 Call Forward Procedure
Feature Button Sequence
Call Forward Any Call - Internal and Incoming Line Calls:
Forwards any call, whether an internal call or incoming line call.
All Calls Extension button +
(Tone) + Destination No. (Tone)
Busy Extension button +
(Tone) + Dest. No. (Tone)
No Answer Extension button +
(Tone) + Dest. No. (Tone) + Timer +