User guide
Table Of Contents
- Title Page
- Publication Information
- TAIS TSD License Agreement
- TAIS TSD Limited Warranty
- Contents
- Introduction
- Chapter 1 - The Grand Tour
- Chapter 2 - Installation
- Step 1: Review Safety Instructions
- Step 2: Select Location
- Step 3: Mount on a Wall
- Step 4: Connect Telephone Cables
- Step 5: Connect and Apply Power
- Step 6: Raise the Base Unit Antenna
- Step 7: Install Handset Battery
- Step 8: Charge Batteries for First Time
- Step 9: Install Headset (Optional)
- Step 10: Install Belt Clip
- Chapter 3 - Configuration
- Chapter 4 - Handset Operation
- Chapter 5 - Features
- Account Code Calls
- Automatic Busy Redial
- Automatic Callback
- Auto Redial
- Call Forward
- Call Park Orbits
- Call Waiting
- Direct Station Selection Buttons (Hotline)
- Do Not Disturb
- Door Lock(s)
- Door Phone(s)
- Emergency Ringdown
- Held Calls
- ISDN Outgoing Calling
- Message Waiting
- Off-hook Call Announce
- Override Calls
- Paging
- Privacy
- Redial
- Release and Answer
- Speed Dial
- Tone/Pulse Dialing
- Voice Mail - Direct Transfer
- Appendix A - Feature Access Codes
- Appendix B - Troubleshooting and Specifications
- Index
Features
Auto Redial
Strata DKT2104-CT Cordless Digital Telephone 01/02 31
Auto Redial
This feature enables you to automatically redial the last number (outside or extension
number) called by pressing
5HGLDO. 5HGLDO must be programmed as one of the four
flexible buttons on the telephone.
1. Press your extension or
/LQHbutton. Make sure that you press the same extension
or
/LQHbutton that you used to dial the telephone number that you wish to redial.
You hear dial tone.
2. Press
5HGLDO. The last telephone number you dialed is automatically redialed.
Call Forward
System
System Call Forward (which is set in Programming) automatically directs calls to a
predefined location, such as Voice Mail. See your CTX System Administrator to
determine which type of Call Forward you have, as well as the Call Forward location.
Station
Station Call Forward enables you to assign Call Forward destinations for each
extension on your phone. Each extension can be independently set for a different Call
Forward feature.
Call Forward must be set prior to receiving the call.
The following calls to your station can be forwarded:
• Internal calls
• Auto Attendant calls
• Outside lines that ring only your station
• Transferred internal or incoming line calls