User guide
Table Of Contents
- Title Page
- Publication Information
- TAIS TSD License Agreement
- TAIS TSD Limited Warranty
- Contents
- Introduction
- Chapter 1 - The Grand Tour
- Chapter 2 - Installation
- Step 1: Review Safety Instructions
- Step 2: Select Location
- Step 3: Mount on a Wall
- Step 4: Connect Telephone Cables
- Step 5: Connect and Apply Power
- Step 6: Raise the Base Unit Antenna
- Step 7: Install Handset Battery
- Step 8: Charge Batteries for First Time
- Step 9: Install Headset (Optional)
- Step 10: Install Belt Clip
- Chapter 3 - Configuration
- Chapter 4 - Handset Operation
- Chapter 5 - Features
- Account Code Calls
- Automatic Busy Redial
- Automatic Callback
- Auto Redial
- Call Forward
- Call Park Orbits
- Call Waiting
- Direct Station Selection Buttons (Hotline)
- Do Not Disturb
- Door Lock(s)
- Door Phone(s)
- Emergency Ringdown
- Held Calls
- ISDN Outgoing Calling
- Message Waiting
- Off-hook Call Announce
- Override Calls
- Paging
- Privacy
- Redial
- Release and Answer
- Speed Dial
- Tone/Pulse Dialing
- Voice Mail - Direct Transfer
- Appendix A - Feature Access Codes
- Appendix B - Troubleshooting and Specifications
- Index
Handset Operation
Using Busy Override
22 Strata DKT2104-CT Cordless Digital Telephone 01/02
Using Busy Override
➤ Press
Busy Override is activated (use only if the called station is not equipped for OCA).
...or
. Executive Override (system programmable option) is activated.
Calling the Attendant Console
There are three ways to call the Attendant Console depending upon system
programming. You can call any Attendant Console, a particular Attendant Console, or
all Attendant Consoles.
➤ To Call Any Console
➤ Press a [DN] + 0. The call rings the Attendant Console. Dial 0 calls rotate between
the consoles if more than one console is installed.
➤ To Call a Specific Console
➤ Press a [DN] + the console’s [DN] ______. The call rings the console ,Q'1.
Note Your System Administrator can provide the Attendant Console [DNs].
➤ To Make an Emergency Call to All Consoles
➤ Press [DN] + #911. The call rings all consoles Emgr.
Using ISDN Trunks
1. Access an outside CO line.
2. Enter a number.
3. Press
6WDUW.
The dialed digits are not sent until you press
6WDUW or the timer expires. See
“ISDN Outgoing Calling” on page 45 for more information on ISDN calls.