User guide
Table Of Contents
- Title Page
- Publication Information
- TAIS TSD License Agreement
- TAIS TSD Limited Warranty
- Contents
- Introduction
- Chapter 1 - The Grand Tour
- Chapter 2 - Installation
- Step 1: Review Safety Instructions
- Step 2: Select Location
- Step 3: Mount on a Wall
- Step 4: Connect Telephone Cables
- Step 5: Connect and Apply Power
- Step 6: Raise the Base Unit Antenna
- Step 7: Install Handset Battery
- Step 8: Charge Batteries for First Time
- Step 9: Install Headset (Optional)
- Step 10: Install Belt Clip
- Chapter 3 - Configuration
- Chapter 4 - Handset Operation
- Chapter 5 - Features
- Account Code Calls
- Automatic Busy Redial
- Automatic Callback
- Auto Redial
- Call Forward
- Call Park Orbits
- Call Waiting
- Direct Station Selection Buttons (Hotline)
- Do Not Disturb
- Door Lock(s)
- Door Phone(s)
- Emergency Ringdown
- Held Calls
- ISDN Outgoing Calling
- Message Waiting
- Off-hook Call Announce
- Override Calls
- Paging
- Privacy
- Redial
- Release and Answer
- Speed Dial
- Tone/Pulse Dialing
- Voice Mail - Direct Transfer
- Appendix A - Feature Access Codes
- Appendix B - Troubleshooting and Specifications
- Index

Handset Operation
Important - Read First
20 Strata DKT2104-CT Cordless Digital Telephone 01/02
Important - Read First
Be sure to check with your CTX System Administrator and make sure you know
which features are enabled on your system. Use the check boxes
❐ throughout this
book to mark which features you have.
What’s My Line?
Throughout this guide, the word “Line” is mentioned. For example, you will be
instructed to “select a Line.” “Line” can be:
❐ Linebutton
❐ Pooled Line Group button
❐ Group Line button
❐ Line out requiring an access code - where you enter an outside line or line group
access code (for example, dialing
to get an outside line).
Check mark which Line type you have, then use that selection when instructed to
“select a Line.”
Making a Call
Internal Numbers
1. Press WDON or a [DN]. You hear dial tone and the
LED lights steady.
2. Dial a [DN].
Notes
• If you have Voice First Signaling, make a voice announcement when you hear a
single tone.
• If you have Tone Signaling, you hear repeated ring tones. Wait for the call to be
answered.
• If the called station does not answer, you can leave a message by pressing 06* or
.
6700
talk










