User guide
Table Of Contents
- Title Page
- Publication Information
- TAIS TSD License Agreement
- TAIS TSD Limited Warranty
- Contents
- Introduction
- Chapter 1 - The Grand Tour
- Chapter 2 - Installation
- Step 1: Review Safety Instructions
- Step 2: Select Location
- Step 3: Mount on a Wall
- Step 4: Connect Telephone Cables
- Step 5: Connect and Apply Power
- Step 6: Raise the Base Unit Antenna
- Step 7: Install Handset Battery
- Step 8: Charge Batteries for First Time
- Step 9: Install Headset (Optional)
- Step 10: Install Belt Clip
- Chapter 3 - Configuration
- Chapter 4 - Handset Operation
- Chapter 5 - Features
- Account Code Calls
- Automatic Busy Redial
- Automatic Callback
- Auto Redial
- Call Forward
- Call Park Orbits
- Call Waiting
- Direct Station Selection Buttons (Hotline)
- Do Not Disturb
- Door Lock(s)
- Door Phone(s)
- Emergency Ringdown
- Held Calls
- ISDN Outgoing Calling
- Message Waiting
- Off-hook Call Announce
- Override Calls
- Paging
- Privacy
- Redial
- Release and Answer
- Speed Dial
- Tone/Pulse Dialing
- Voice Mail - Direct Transfer
- Appendix A - Feature Access Codes
- Appendix B - Troubleshooting and Specifications
- Index
Strata DKT2104-CT Cordless Digital Telephone 01/02 17
Handset Operation 4
This chapter familiarizes you with basic handset operation, including:
• Switching cordless and DKT modes
• Signaling
• Controlling handset and ringer volume
• Making and answering calls
• Calling busy stations and attendant consoles
• Using CO access codes
• Using ISDN trunks
• Transferring and conferencing calls
Your cordless telephone is easy to use and has a lightweight handset. The LCD gives
you up-to-the minute status on transmission and call processing. If the LCD is blank,
the handset is in standby mode and ready to use.
Note The LCD displays no service when you are out of range, and you have 20
seconds to move back into range.