User guide
Table Of Contents
- Title Page
- Publication Information
- TAIS TSD License Agreement
- TAIS TSD Limited Warranty
- Contents
- Introduction
- Chapter 1 - The Grand Tour
- Chapter 2 - Installation
- Step 1: Review Safety Instructions
- Step 2: Select Location
- Step 3: Mount on a Wall
- Step 4: Connect Telephone Cables
- Step 5: Connect and Apply Power
- Step 6: Raise the Base Unit Antenna
- Step 7: Install Handset Battery
- Step 8: Charge Batteries for First Time
- Step 9: Install Headset (Optional)
- Step 10: Install Belt Clip
- Chapter 3 - Configuration
- Chapter 4 - Handset Operation
- Chapter 5 - Features
- Account Code Calls
- Automatic Busy Redial
- Automatic Callback
- Auto Redial
- Call Forward
- Call Park Orbits
- Call Waiting
- Direct Station Selection Buttons (Hotline)
- Do Not Disturb
- Door Lock(s)
- Door Phone(s)
- Emergency Ringdown
- Held Calls
- ISDN Outgoing Calling
- Message Waiting
- Off-hook Call Announce
- Override Calls
- Paging
- Privacy
- Redial
- Release and Answer
- Speed Dial
- Tone/Pulse Dialing
- Voice Mail - Direct Transfer
- Appendix A - Feature Access Codes
- Appendix B - Troubleshooting and Specifications
- Index
Configuration
Enter the Program Mode
16 Strata DKT2104-CT Cordless Digital Telephone 01/02
4. While holding
and
, press WDON (shown at right).
5. Release
, , and WDON simultaneously.
6. Press
FKDQ until data store displays.
7. Press
to toggle the settings for each program step
...or store the setting when in the
data store step.
8. Press
WDON at any time to exit without saving changes
...or save the changes by stepping to
data store and
pressing
before WDON.
Note The F3 LED changes for each of the
program steps after
is pressed.
4504
PROGRAM
RESERVED
RESERVED
RESERVED
RESERVED
RCV. LEVEL
NORMAL
RCV. LEVEL
-4 DB
TALK-QUIT
0-STORE
DATA STORE
TALK-QUIT
R/VOL
F1
ON
F1
OFF
F2
ON
F2
OFF
F3
ON
F3
OFF
R/VOLMUTE
TALK
R/VOL
MUTE
R/VOLMUTE
0
0
0
0
4772