User guide
Table Of Contents
- Title Page
- Publication Information
- TAIS TSD License Agreement
- TAIS TSD Limited Warranty
- Contents
- Introduction
- Chapter 1 - The Grand Tour
- Chapter 2 - Installation
- Step 1: Review Safety Instructions
- Step 2: Select Location
- Step 3: Mount on a Wall
- Step 4: Connect Telephone Cables
- Step 5: Connect and Apply Power
- Step 6: Raise the Base Unit Antenna
- Step 7: Install Handset Battery
- Step 8: Charge Batteries for First Time
- Step 9: Install Headset (Optional)
- Step 10: Install Belt Clip
- Chapter 3 - Configuration
- Chapter 4 - Handset Operation
- Chapter 5 - Features
- Account Code Calls
- Automatic Busy Redial
- Automatic Callback
- Auto Redial
- Call Forward
- Call Park Orbits
- Call Waiting
- Direct Station Selection Buttons (Hotline)
- Do Not Disturb
- Door Lock(s)
- Door Phone(s)
- Emergency Ringdown
- Held Calls
- ISDN Outgoing Calling
- Message Waiting
- Off-hook Call Announce
- Override Calls
- Paging
- Privacy
- Redial
- Release and Answer
- Speed Dial
- Tone/Pulse Dialing
- Voice Mail - Direct Transfer
- Appendix A - Feature Access Codes
- Appendix B - Troubleshooting and Specifications
- Index
Installation
Step 5: Connect and Apply Power
12 Strata DKT2104-CT Cordless Digital Telephone 01/02
Step 5: Connect and Apply Power
Base Unit
1. Plug the AC adapter cord into the AC adapter
input jack on the Base Unit (shown at right).
2. Plug the AC adapter into a standard 120VAC
wall outlet.
3. Check to see that the power LED is on.
Charger Unit
1. Plug the AC adapter cord into the input jack on the
Charger Unit (shown at right).
2. Plug the AC adapter into a standard 120VAC wall
outlet.
3. Check to see that the power LED is on.
Important!
• If the power does not light on either the Charger or Base Units, return everything
to your Authorized Dealer.
• Always route the power cord where it is not a trip hazard, and where it cannot
become chafed and create a fire or electrical hazard.
Step 6: Raise the Base Unit Antenna
➤ Before using your handset, raise the Base Unit antenna to the vertical position.
AC Adapter
4381
4552