User guide

Installation
Step 4: Connect Telephone Cables
Strata DKT2104-CT Cordless Digital Telephone 01/02 11
5. Ensure that the wall-mount plate is placed on
the wall so that the “feet” are at the bottom
when you are looking at the inside of the
plate.
6. Snap the Base Unit onto the plate (shown
above).
Step 4: Connect
Telephone Cables
➤ To connect as a stand-alone telephone
➤ Connect the modular jack
labeled “Line In” directly to the
telephone wall jack using one of
the supplied cables (shown at
right).
➤ To connect to a Strata DKT
1. Unplug the cable from the DKT
and plug into the “Line In” jack
of cordless telephone Base Unit
(shown at right).
2. Plug the additional two-foot
cable into the “Line Out” jack
of the Base Unit and into the
DKT jack located on the bottom
of the telephone.
4507
4502
Digital
Telephone Circuit
Line In
4380
Digital
Telephone Circuit
Line In
Line Out
To DKT