User guide
Table Of Contents
- Title Page
- Publication Information
- TAIS TSD License Agreement
- TAIS TSD Limited Warranty
- Contents
- Introduction
- Chapter 1 - The Grand Tour
- Chapter 2 - Installation
- Step 1: Review Safety Instructions
- Step 2: Select Location
- Step 3: Mount on a Wall
- Step 4: Connect Telephone Cables
- Step 5: Connect and Apply Power
- Step 6: Raise the Base Unit Antenna
- Step 7: Install Handset Battery
- Step 8: Charge Batteries for First Time
- Step 9: Install Headset (Optional)
- Step 10: Install Belt Clip
- Chapter 3 - Configuration
- Chapter 4 - Handset Operation
- Chapter 5 - Features
- Account Code Calls
- Automatic Busy Redial
- Automatic Callback
- Auto Redial
- Call Forward
- Call Park Orbits
- Call Waiting
- Direct Station Selection Buttons (Hotline)
- Do Not Disturb
- Door Lock(s)
- Door Phone(s)
- Emergency Ringdown
- Held Calls
- ISDN Outgoing Calling
- Message Waiting
- Off-hook Call Announce
- Override Calls
- Paging
- Privacy
- Redial
- Release and Answer
- Speed Dial
- Tone/Pulse Dialing
- Voice Mail - Direct Transfer
- Appendix A - Feature Access Codes
- Appendix B - Troubleshooting and Specifications
- Index
Strata DKT2104-CT Cordless Digital Telephone 01/02 1
The Grand Tour 1
This chapter familiarizes you with the Strata CTX DKT2104-CT Cordless Digital
Telephone handset and its batteries, Base and Charger Units, and fixed buttons.
Chapter 5 – Features, beginning on page 27 covers the four pre-assigned flexible
buttons.
The DKT2104-CT brings mobility and productivity to office telephones. It cuts down
on “telephone tag” delays and is easy to take with you. It works with Strata CTX and
Strata DK telephone systems (except Strata DK24/56/96, Release 3) and provides you
with reliability, long life, and outstanding performance. Some of its features are:
• Liquid Crystal Display (LCD) that wraps using 2 lines, total of 32 characters
• Four displayed operation modes, including Message Waiting (MW)
• HOLD, MSG (with MSG LED), CNF/TRN, and MUTE buttons
• Wall-mount plate, belt clip, and two batteries
• Two handset volumes, four ring levels, and a vibration mode
• Simultaneous charging of handset and spare batteries
• Wall-mount or desktop unit
• Stand-alone or DKT operation