User's Manual

9. Adjusting the Level of Brightness
The Combat Command LCD Display can be set to the preferred level of brightness. In order to
adjust the level of brightness, please follow these steps
10. Entering and Exiting the TurboFire EVO Menu
Each time you wish to access the TurboFire EVO Menu you need to short tap the Home button
on the TurboFire EVO controller. Access the usual PS3 menus when pressing and holding the
Home button for over a second.
Whilst you are within the TurboFire EVO menu the TurboFire EVO buttons and controls will
only allow you to control the TurboFire EVO menu. In order to exit the TurboFire EVO Menu
and regain control of your console, you need to tap the Home button, Back button or
button.
11. Activating Features
It is possible to set each of the features to activate in one of five ways. You can choose to
activate and deactivate a feature by pressing the F1 or F2 button. You can choose to activate a
feature when you are pressing and holding the F1 or F2 button. Alternatively you can choose to
have a feature set to always on, meaning that you do not need to press any button to activate
the feature. When activating features you can use multiple instances of some features such as
Rapid Fire and Sniper.
When you have entered the TurboFire EVO menu as detailed in the previous section, using the
Left Analog Stick or the Direction buttons you can scroll between the four features. With the
feature which you wish to activate highlighted, using the button on the TurboFire EVO you
can toggle the highlighted feature between the five different activation modes. Each of the
activation modes is indicated by an icon being added to the highlighted feature as follows: