User`s manual

23
User’s Manual
4.4 Eliminating the Paper Jam
- Do not carry out this work just after printing because the printing head is very hot.
- Be sure to turn off the power when detaching the platen roller unit.
- When eliminating remaining paper, do not touch the heating surface of the
head with a bare hand or metal piece.
- Do not detach the platen roller unit unless necessary, such as for a paper jam.
- When putting back the platen roller unit, be sure to confirm that it is correctly
reattached.
- Never detach or reattach the platen roller unit with the head-up lever
lowered.
!
CAUTION
1 Turn off the power.
2 Detach the printer cover.
3 Cut the paper roll near the paper insertion slot.
4 Raise the head-up lever.
5 Raise the blue levers located on both sides of the platen roller unit, to gently
detach the unit. The platen roller unit can be detached by manually raising
the blue levers.
6 Remove the remaining paper roll completely from the paper passage.
7 Confirming the direction of the platen roller unit, reattach it to the mechanism.
Shift down the blue levers on both sides, to fix the unit.
8 Lower the head-up lever.