User`s manual

1 DATECS LP-50

CAUTION

— The printer cover is not stationary (Opening/Closing). After detaching it,

be careful not to lose or break it

— Do not insert a ragged or dog-eared end of the paper roll, because it could

result in a paper jam or insertion error.

— If the paper roll is still slack, rewind the paper to remove the slack

— If the paper roll is tilted, rais the head-up lever to correct the paper roll

posotion, or pull out the paper roll and set it again.

— Do not open the printer cover while printing.

— Do not hold or press the paper roll while printing, because it could cause a

paper jam.

— After the paper is set, the printer is made ready to start printing. Note that if

data is remaining in the buffer, the printer will start printing after the paper is set.

— Do not run the printer with its cover removed, because it could cause

malfunctioning or an irregularity of the sensor.