User`s manual

1 DATECS LP-50

4. OPERATION

4.1 Connecting AC Adapter

CAUTION

— Use only the specified AC adapter.

— When disconnecting/reconnecting the cable connector of the AC adapter,

be sure to hold the connector.

— Separate the AC adapter from other noise-generating devices.

— Pulling the AC power cord may damage it, resulting in a fire, electric shock,

or snapping.

— If a thunder/lightning storm is nearby, disconnect the AC adapter from the

socket and do not use the printer, because a fire or electric shock may occur.

— Do not put the AC power cord close to a heating device.

Its coating can mel and cause a fire or electric shock.

— Install the printer in a well-ventilated place, because the AC adapter

generates heat when it is used.

— Use the specified AC power source. Connect to a power source with sufficient

capacity. If the capacity is insufficient, a fire may result from heat generation.

— After using the printer or when not using it for a long period of time, be sure

to unplug the AC adapter from a plug socket for your safety.

1 Turn off the power.

2 Connect the cable connector of the AC adapter

to the power connector located on the back

of the printer.

3 Connect the AC power cord of the AC adapter,

and plug it into a socket.