User`s manual

1 DATECS LP-50

2.2 Paper Specifications

2.2.1 Recommended Paper

 Thermal paper roll

 Type: Thermal paper

 Paper width: 58 + 0/–1 mm

 Paper thickness: 60~75µm

 Roll diameter: φ 83 mm or less

 Printing surface: Outside of the roll (Surface)

 Recommended paper: TF50KS-E2C (Monochrome) made by NIPPON SEISHI

or its equivalent 735FA (2-color, Black based) made by RICOH or its equivalen

PB670 (2-color, Red based) made by MITSUBISHI SEISHI or its equivalent

 Core: φ12 mm (Inner dia.), φ18 mm (Outer dia.)

CAUTION

— Use of non-specified paper may cause irregularity of print density.

— Do not paste the paper to the core.

— If the paper comes in contact with a chemical or oil, it may discolor or lose a

record.

— Do not rub the paper surface strongly with a nail or hard metal. It may discolor.

— Discoloring starts at about 70

C. Watch out for effects of heat, humidity, light,

and so on.

— Do not use the label paper when the printer has been set for thermal paper,

and vice versa. Be careful not to mistake a type of label paper. It could cause

malfunctioning or damage the printing head.