User`s manual

User’s Manual

PRECAUTIONS FOR HANDLING

Do not handle the equipment in the following manners, because prob-

lems may result.

— Do not use any other power source besides the accessory AC adapter.

Also, do not use the AC adapter for other purposes.

— Do not print without paper.

— Do not drop or put any foreign object, such as a clip, pin, or the like, inside the

printer.

— Do not spill any liquid or spray any chemical-containing liquid over the

equipment.

— Never use a pointed object, such as a pen, to operate the operation panel.

— Do not use Scotch tape to fasten paper together for continuous use. It could

damage the printing head.

— Never pull the set paper forcibly. When opening/closing the printer cover,

take care that the paper will not be caught. It could cause the paper to jam.

— Be sure to use the specified paper. Use of other paper could deteriorate the

print quality or cause a problem with the printing head.

To Prevent and Spreading of Damage

— Never touch the printing head motor, or paper cutting blade. Your finger may

be cut.

— During power-on or immediately after printing, do not touch electrical parts

or moving parts, such as the mechanism, motor, internal dear, etc. They may be

very hot and can burn your hand/finger.

— Be careful to avoid bodily injure or damaging other objects with an edge of

sheet metal.

— Should any error occur while operating the equipment, stop it immediately

and disconnect the power plug from the plug socket.

— Only a qualified serviceman is allowed to disassemble or repair the printer.

— Should a problem occur, leave solving it to our serviceman. Do not

disassemble the equipment on your own.

— When opening/closing the printer cover, and so on, be careful not to catch

your hand or finger on the equipment.

— After using the equipment, turn off the power switch and unplug the AC

adapter from a plug socket.