User`s manual

1 DATECS EP-50
16 17
User’s Manual
2.2 Paper Specifications
2.2.1 Recommended Paper
y Thermal paper roll
y Type: Thermal paper
y Paper width: 58 + 0/–1 mm
y Paper thickness: 60~75µm
y Roll diameter: φ 83 mm or less
y Printing surface: Outside of the roll (Surface)
y Recommended paper: TF50KS-E2C (Monochrome) made by NIPPON SEISHI
or its equivalent 735FA (2-color, Black based) made by RICOH or its equivalen
PB670 (2-color, Red based) made by MITSUBISHI SEISHI or its equivalent
y Core: φ12 mm (Inner dia.), φ18 mm (Outer dia.)
!
CAUTION
y Use of non-specified paper may cause irregularity of print density.
y Do not paste the paper to the core.
y If the paper comes in contact with a chemical or oil, it may discolor or lose a
record.
y Do not rub the paper surface strongly with a nail or hard metal. It may discolor.
y Discoloring starts at about 70
0
C. Watch out for effects of heat, humidity, light,
and so on.
y Do not use the label paper when the printer has been set for thermal paper,
and vice versa. Be careful not to mistake a type of label paper. It could cause
malfunctioning or damage the printing head.
2.2.2 Recommended Paper
Thermal paper
2.2.3 Printing Head and Paper Cutter Layout