User`s manual

1 DATECS EP-50
50 51
User’s Manual
30. ESC V n
Specifying/Canceling 90º -right- turned Characters
[Code] [1Bh] + [56h] + n
[Range] {0 <= n <= 1}.
[Outline] Specifying/canceling characters 90º -right- turned character.
• “n” means the followings.
0 Canceling 90º -right- turned Characters
1 Specifying 90º -right- turned Characters
[Caution] • No underlines are attached to 90º -right- turned characters .
[Default]
• The initial value of n is “0”.
[Sample Program]
LPRINT CHR$ (&H1B) + “V” + CHR$ (0);
LPRINT “AAAAA”;
LPRINT CHR$ (&H1B) + “V” + CHR$ (1);
LPRINT “AAAAA” + CHR$ (&HA);
[Print Results]
31. ESC X n
Select maximum printing speed
[Code] [1Bh] + [58h] + n
[Range] {0 <= n <= 3}
{‘0’ <= n <= ‘3’}
[Outline] Selects the maximum printing speed according to the value of ‘n’:
0 or ‘0’ about 50 mm/s
1 or ‘1’ about 42 mm/s
2 or ‘2’ about 33 mm/s
3 or ‘3’ about 25 mm/s
These values are approximate. The real maximum speed depends
on the print intensity and the printing head’s temperature.
[Default] The default value is 0 – maximal printing speed.
28. ESC M n
Specifying/canceling highlighting
[Code] [1Bh] + [4Dh] + n
[Range] {0 <= n <= FFh}
[Outline] Selects character font.
• “n” is valid only for the lowest bit (n0).
• Control by the lowest bit (n0) is shown as follows:
0 Selection of font A (12x24).
1 Selection of font B (9x16).
[Caution] ESC ! can also select fonts, but the setting made by the command
processed last is valid.
[See also] ESC !
[Sample Program]
LPRINT CHR$(&H1B) + “M” + CHR$(0);
LPRINT “AAAAA”;
LPRINT CHR$(&H1B) + “M” + CHR$(1);
LPRINT “AAAAA”;
[Print Results]
AAAAAAAAAA
&KDUDFWHU6HW
Q &RXQWU\
K K K %K &K 'K (K K %K &K 'K (K

86$   # > ? @ A C ^ _ ` a

)UDQFH   j    A C p  q 

*HUPDQ\    b g h A C l |  

8.   # > ? @ A C ^ _ ` a

'HQPDUN,   #   c A C  ¡ n a

6ZHGHQ   e b g c h p l | n 

,WDO\   #  ? p A  j z q u

6SDLQ, 3W  # £ f ¢ A C  x ` a

-DSDQ   # >  @ A C ^ _ ` a

1RUZD\  ͞ ech p ¡ n 

'HQPDUN,,   e   c h p  ¡ n 
29. ESC R n
Selecting international character set
[Code] [1Bh] + [52h] + n
[Range] {0 <= n <= 10}
[Outline] Depending on the value of „n“, one of the following character sets
is selected: