User`s manual

1 DATECS EP-50
30 31
User’s Manual
9. DETAILED DESCRIPTION
XXXX ALL
[Function] Command Function
[Code] A sequence of code constituting a command is represented in
hexadecimal number for <>H, binary number for < >B, and decimal
number for < >, respectively; [ ]k represents a repeat count of k-times.
[Range] Describes an argument value(setting range) for the command.
[Outline] Describes a command outline.
[Caution] Describes a caution as required.
[Default] Describes an initial value for the command when accompanied by
an argument.
[See Also] Describes the associated commands for use.
[Sample Program]
Describes a coding example in the Q-BASIC sample program.
* This example is only for your reference and differs depending on the language
used, version, and so on. For details, see the manual for the language used.
1. BEL
Sounds the beeper
[Code] [07h]
[Outline] Sounds the beeper.
2. HT
Horizontal Tab Command
[Code] [09h]
[Outline] Shifts the printing position to the next horizontal tab position.
• Ignored when the next horizontal tab position has not been set.
• The horizontal tab position is set by ESC D.
• Initial setting of the horizontal tab position is each 8 characters in
9th, 17th, 25th, columns.
[See Also] ESC D
33 ESC Z Transmits identification string 1BH 5AH
34 ESC \ Specifying the relative positions 1BH 5CH n1 n2
35 ESC _ Restore factory settings 1BH 5FH
36 ESC ‘ Transmits current battery voltage and the
print head temperature 1BH 60H
37 ESC a Aligning the characters 1BH 61H n
38 ESC c5 Enabling/disabling the panel switches 1BH 63H 35H n
39 ESC d Printing and feeding the paper by n lines 1BH 64H n
40 ESC i Cutting the paper
41 ESC m Cutting the paper
42 ESC p Generating a drawer-kick pulse
43 ESC t Selecting the character code table
44 ESC v Transmitting the printer status 1BH 76H n
45 ESC x Reversing the print direction 1BH 78H n
46 ESC { Specifying/canceling the inverted characters 1BH 7BH n
47 GS ( A Printing a self-test
48 GS B Specifying/canceling the black/white
inverted printing
49 GS L Setting the left margin 1DH 4CH n1 n2
50 GS V Cutting the paper
51 GS k Printing the bar code 1DH 6BH n [d]
52 GS w Selecting the horizontal size (scale factor)
of bar code 1DH 77H n
53 GS h Selecting the height of the bar code 1DH 68H n
54 GS H Selecting of print position of HRI code 1DH 48H n
55 GS f Selecting the font of HRI code 1DH 66H n
56 GS p Setting bar code PDF-417 parameters 1DH 70H
57 GS v 0 Printing of raster bit image
58 GS * Defining the downloaded bit image 1DH2An1n2[d]n1xn2
59 GS / Printing the downloaded bit image 1DH 2FH m
60 GS : Starting/ending macro definition 1DH 3AH
61 GS ^ Executing the macro 1DH 5EH n1 n2 n3
62 FS p Printing the downloaded NV bit image
63 FS q Defining the downloaded bit image