User`s manual

1 DATECS EP-50
28 29
User’s Manual
7. POWER CONNECTOR
This connector is to supply the power from the special AC adapter (DATECS PS).
Connector Schematic
Jack used: HEC0470-01-640 (HOSHIDEN) or its equivalent
Applicable plug: JXP series type A (I.D.: 2.45 mm, O.D.: 5.5 mm)
(HOSHIDEN) or its equivalent
No. Function
1 12V
2 GND
Inner terminal: Plus pole:
y Be sure to use the specified AC adapter. Use of any other power source
could cause trouble to or break the printer.
y Do not connect the power source with different polarity.
y After using the printer or when not using it for a long period of time, be sure
to unplug the AC adapter from a plug socket for your safety.
!
CAUTION
Inner terminal: Plus pole
Outer terminal: Minus pole(GND)
8. COMMAND LIST
1 BEL Sounds the beeper 07H
2HT Horizontal tab command 09H
3LF Printing and paper feed 0AH
4CR Print command 0DH
5 ESC RS Sounds the beeper 1BH 1EH
6 ESC SP Setting the right space amount of the character 1BH 20H n
7 ESC # Setting the Euro symbol position 1BH 23H n
8 ESC $ Specifying the absolute positions 1BH 24H n1 n2
9 ESC % Selecting user character set 1BH 25H n
10 ESC & Define user characters 1BH 26H m n1 n2
11 ESC ! Collective specifying printing mode 1BH 21H n
12 ESC * Specifying the bit image mode 1BH 2AH m n1n2[d]k
13 ESC - Specifying/cancelling underline 1BH 2DH n
14 ESC . Self test / demo
15 ESC , Printing diagnostic information 1BH 54H
16 ESC 2 Specifying 1/6-inch line feed rate 1BH 32H
17 ESC 3 Setting line feed rate of minimum pitch 1BH 33H n
18 ESC 8 Temporary store current print settings 1BH 38H
19 ESC 9 Restore saved printer settings 1BH 39H
20 ESC = Data input control 1BH 3DH n
21 ESC > Set Factory Defaults 1BH 3EH n
22 ESC @ Initializing the Printer 1BH 40H
23 ESC D Setting horizontal tab position 1BH 44H [n]k 00H
24 ESC E Specifying/cancelling highlighting 1BH 45H n
25 ESC G Specifying/cancelling double printing 1BH 47H n
26 ESC I Specifying/cancelling italic printing 1BH 49H n
27 ESC J Printing and feeding paper n/203 inch 1BH 4AH n
28 ESC M Selecting character font A or B 1BH 4DH n
29 ESC R Setting the international character set
30 ESC V Specifying/canceling 90°-right-turned characters 1BH 56H n
31 ESC X Select maximal printing speed
32 ESC Y Selecting intensity level 1BH 59H n