User`s manual

List of Commands for ESC/POS Mode
22
7
DATECS
Е
P
-
2000
№ Command Description
1 BEL Sounds the buzzer
2 HT Horizontal Tab Command
3 LF Printing а line and Paper Feeding command
4 FF Printing and paper feeding to the black mark position
5 CR The operation of the command depends on the state of the
configuration flags 2, 3 and 4
6 DC2 =
DC3 (Ruled line) commands sequence start
7
DC3 ( Sets the ruled line ON
8
DC3 + Sets the ruled line off
9
DC3 - Selects ruled line A
10
DC3 A Selects ruled line B
11
DC3 B Clears selected ruled line buffer
12
DC3 C Sets a single dot in selected ruled line buffer
13
DC3 D Ruled line pattern set
14
DC3 F Ruled line line set
15
DC3 L Selects ruled line combine mode
16
DC3 M Ruled line 1 dot line print
17
DC3 P Ruled line n dots line print
18
DC3 p Ruled line image write
19
DC3 v Canceling print data in page mode
20
CAN Printing data in page mode
21
ESC FF DC3 (Ruled line) commands sequence start
22 ESC RS Sounds the buzzer
23 ESC SP Setting character spacing
24 ESC # Setting EURO symbol position
25 ESC $ Specifying the absolute horizontal position of printing
26 ESC % Selecting/Canceling the printing of downloaded user character sets
27 ESC & Selecting user character set
28 ESC ! Specifying printing mode of text data
29 ESC * Printing graphical data
30 ESC - Selecting/Canceling underlining
31 ESC . Printing self test/diagnostic information