User`s manual

Setup
17
DATECS
Е
P
-
2000
Adjusting the paper near-end sensor
1. Lightly push in the paper near-end sensor unit
2. Move the paper near-end sensor unit to the right and left while keeping to press it.
The sensor position is as shown below depending on the diameter of the roll paper
used.
Sensor
position
Roll paper diameter
at the detection of near-end (mm)
Outer core diameter
of roll paper used
1 22 18
2 25 22
3 29 25
4 34 32
Loading Drivers for ЕP-2000:
To print information from your device it is necessary to install ESC/POS drivers.
Current versions of application programs, drivers and SDK are distributed online and are
available for free download at the website, indicated below:
www.datecs.bg
Paper near-end
sensor unit