User manual

!
USER MANUAL |
!
16!
HARDWARE SETUP
• Holding the <ON/OFF> button while power on the DPP-450
printer for more than 6 seconds will enter hardware setup mode.
The “STATUS” (red led) will blink once and DPP-450 will print the
message in the figure below:
Figure 16
• While in hardware setup mode, press <FEED> button to enter Hardware
menu options. The DPP-450 will print the current saved settings.
Figure 17
• The figure below show the LCD in hardware configuration menu:
Figure 18
• Use the <PRINT> button to move down and use the <FEED> button to
select selected.