User's Guide

1 DATECS
Card Reader One User Guide 1 DATECS Page 17 of 22
Smart Card Reader Use
The smart card transaction procedure can vary depending on the application loaded on the
Card Reader One. Verify the proper procedure with your application provider before
performing a smart card transaction.
To Conduct a Smart Card Transaction
1 Position a smart card with the gold contacts facing upward (Figure 6).
2 Insert it into the ICC card reader slot in a smooth, continuous motion until it seats firmly.
3 Hand Card Reader One to customer for PIN entry
4 Remove the card when the display indicates the transaction is completed.
Figure 6
Smart card with the gold contacts upward
Leave the smart card in the card reader until the transaction is completed. Premature removal can
void the transaction.