User's Guide

1 DATECS
Card Reader One User Guide 1 DATECS Page 15 of 22
COMMUNICATION PARAMETERS
The default USB VC serial port communication parameters are the following:
115200bps
8bit
1 stop bit
no parity
APPLICATION SETTINGS
USB MODE DEVICE
BLUETOOTH Settings
Mode: ENABLE/DISABLE
ADDR: MAC ADDRESS of the Bluetooth
NAME: Bluetooth name
PASS: Bluetooth password
PAIR: DISCOVERABLE/HIDDEN
AUTO: ENABLE/DISABLE
VER: Bluetooth firmware version
MASTER RESET: return to default settings
PAIRING
FW UPDATE
AUTO OFF 60min
*Default settings
Note: Setting can vary depending on the application loaded. To clear Bluetooth settings use
Bluetooth master reset.