User's Guide

1 DATECS
Card Reader One User Guide 1 DATECS Page 12 of 22
Setup
When Card Reader One is switched on and the button is kept pressed, on the display will
be shown the name and the version of the Secure Boot Loader and the firmware.
Service personnel can access two different system modes: Service Mode and Application
Download Mode.
SERVICE MODE
To enter Service Mode for key loading and test operations, the button has to be pressed
while switching on the Card Reader One.
The following keyboard buttons can be used in service mode:
: move through the list one position upwards
: move through the list one position downwards
: selection of the active option
: return to previous level or exit the service mode
The following menu options can be selected in service mode:
INFO VERSION
INFO HARDWARE
INFO KEYS
TEST DISPLAY
TEST KEYBOARD
TEST MSR
TEST SCR
KEYS DOWNLOAD
DELETE DEA KEYS
EXIT
INFO VERSION
Shows the serial numbers and the versions of the detached program modules:
DEV SN Card Reader One serial number
CPU SN USIP serial number
CPU VER USIP version
SBL VER USIP Boot loader version
HAL VER CPU Hardware Abstraction Layer (HAL) version
LOAD VER Secure Boot Loader (SBL) version and name
FW VER Firmware version and name
PROM VER Prompts version
APPL VER Application version and name
PKFA VER Version of the public key used for firmware authentication
PKAA VER Version of the public key used for application authentication
PKKA VER Version of the public key used for manufacturing keys authentication