DW-SBTM1 Bluetooth Module User Manual / Functional Description
DW-SBTM1_UM_00.doc Stand-alone Bluetooth Module User Manual Table of Contents: REGULATORY COMPLIANCE REQUIREMENTS: ..............................................................3 US FCC REQUIREMENTS: ..................................................................................................................3 INDUSTRY CANADA COMPLIANCE REQUIREMENTS: ..........................................................................4 DESIGN REQUIREMENTS: .........................................................
DW-SBTM1_UM_00.doc Stand-alone Bluetooth Module User Manual Regulatory Compliance Requirements: US FCC requirements: Following text must be copied exactly in the user’s manual of the device that uses this Bluetooth Module. Information for Class B Unintentional Radiators (FCC 15.21 & 15.105: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
DW-SBTM1_UM_00.doc Stand-alone Bluetooth Module User Manual Industry Canada Compliance Requirements: This Class B digital apparatus meets the requirements of the Canadian Interference-Causing Equipment Regulations. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Following text must be copied exactly into the product’s user manual.
DW-SBTM1_UM_00.doc Stand-alone Bluetooth Module User Manual General Description: NOTE: All references to internal parts are to be crosschecked against BOM as they represent confidential information. DW-SBTM1 is a standalone Bluetooth module running HCI level Bluetooth stack. It enables data connectivity over distances as much as 10m (30ft). The HCI interface is standard to ###FLASH or ###ROM parts (check BOM).
DW-SBTM1_UM_00.doc Stand-alone Bluetooth Module User Manual Specifications: General Specifications: Frequency Range: Channel Spacing: Number of channels: Operating Voltage: Operating Current: 2402MHz – 2480MHz 1MHz 79 3.3V nominal 60mA nominal during Tx mode Environmental Specifications: Storage Range: Operating Range: Humidity: -20°C to +85°C -5°C to +50°C 5% to 95% non condensing Electrical Specifications: Nominal Electrical settings: Pin Pin Name 1. GND 2. 3. 4. 5. 6. 7. 8.
DW-SBTM1_UM_00.doc Stand-alone Bluetooth Module User Manual Note: VDD2 is internally regulated from VDD1 coming through VDD_ANA pin. It can be supplied externally, but then tight regulation and filtering is required (less than 10mVpp). Check original manufacturer IC data book for more details (Check BOM for part number) RESET pin is active high and has to stay on for at least 5ms for a proper reset of the module.
DW-SBTM1_UM_00.doc Stand-alone Bluetooth Module User Manual Mechanical specifications: 0.53mm 2.00mm 7 X 1.20mm 12.0mm 1.80mm 0.53mm 3 X 1.20mm 0.53mm 0.53mm View from the bottom 3 X 1.20mm Pin 1 7 X 1.20mm 2.00mm 17.
DW-SBTM1_UM_00.doc Stand-alone Bluetooth Module User Manual Contact Information: DATAWIND NET ACCESS CORP. 555 RENE LEVESQUE W, Suite 1130 MONTREAL, QC, H9G 1Z9 CANADA Phone: Fax: Email: 514-871-0984 514-871-3864 info@datawind.
