Manual

USB WIRELESS BRIDGE USER’S MANAUL REV. 02 11
USB Command Reference Table
Main command
Function
Command Name
Command Description
Default
Value
Value Range
help
Displays list of main
commands
NA No parameters
info
Displays device serial
number
NA No parameters
set & get defaults
Restores factory default
settings.
NA No parameters
pkts.en
Enables JSON output format
when used with an ADIO
Wireless Bridge
0 0 or 1
store
Stores settings to non
-
volatile memory.
NA No parameters
ver
Displays loaded firmware
version
NA No parameters
Fig 8. List of RS-232 Wireless Bridge Commands
Figure 8 lists the available commands for the USB Wireless Bridge. The help, ver & info commands are
issued at the command prompt and have no function commands or parameters. Set and get are used to
set and read values for the various commands. Figure 9 shows an example of issuing the different
commands in a terminal program. It also shows the data output from an ADIO Wireless Bridge when the
pkts.en command is set to 1.