Data Sheet
PRODUCT FEATURES
• 7-30VDC input
• Adjustable RF output power
• Configurable channels and addressing
• Dierent power and frequency options for shorter
or longer range
• Compatible with other Datawave wireless bridge
products
• Bidirectional Communication
• Optional DIN Rail mount
• Over-the-air compatible with Digi XBee
datawavewireless.com
Wireless cable replacements with
micro USB and multiple COM ports.
The Datawave Wireless Bridge products are
designed to act as a wireless cable replace-
ments for RS-232 and RS-485 protocols as well
as for 0-10V, 4-20mA Analog signals and stan-
dard 0-5V or 0-3.3V Digital signals. All products
also have a micro USB port that enumerates
as a USB composite device with multiple COM
ports. One COM port can be used for data while
the second COM port provides a terminal for
device settings. All radio parameters can be
configured with AT commands or via free third
party software. The USB wireless Bridge has
a micro USB for data and configuration. The
RS232 Wireless Bridge has a DB9 DCE female
connector for data and radio configuration and
a micro USB port to configure other settings.
The RS-485 and Analog/Digital I/O products
have a five pin screw terminal for data and sig-
nals and a micro USB port for configuration.
It is possible to mix and match wireless
bridge products. The RS-232 Wireless Bridge
will communicate with the RS-485, Analog and
Digital I/O and USB wireless bridge products
that share the same radio configuration. By us-
ing an RS-485 Wireless Bridge at point A and a
RS-232 Wireless Bridge at point B, the wireless
bridges can act as a RS-485 to RS-232 over-
the-air converter.
WIRELESS BRIDGES