User Manual

7" TFT LCD MONITOR
12
Calibrating Datavideo Monitors
Calibrating professional monitors is crucial.For guidance on how to calibrate
a Datavideo Monitor using SMPTE colour bars please visit our website
http://www.datavideo.info/specs/Datavideo_Calibrating_Monitors.pdf
5.Advance(LCDDisplay,ResetFirmwareVersion)
■ Press the MENU button five times to display the Advance setting
menu.
LCDL/RScan
■ Press the ENTER button to highlight the LCD L/R Scan setting.
* N.B.: The LCD L/R Scan will reverse the image displayed
horizontally.
■ Press the ENTER button, the screen image will be reversed (Left to
Right).
■ Press the ENTER button again, the screen image will return to normal
view.
LCD U/D Scan
■ Press UP / DOWN button to highlight the LCD U/D Scan setting.
* N.B.: The LCD U/D Scan will reverse the image displayed
vertically.
■ Press the ENTER button, the screen image will be reversed (Top to
Bottom).
■ Press the ENTER button again, the screen image will return to normal
view.
Reset
■ Press UP / DOWN button to highlight the Reset option.
* N.B.: This option will return the monitor to the factory default
settings.
■ Press the ENTER button to re-start the monitor with the factory default
settings.
Version
■ Press UP / DOWN button to highlight the Version setting.
■ Press the ENTER button, the firmware version will be displayed on
screen.
■ Keep pressing the MENU button to cycle through the main menu
options.
■ Press the SOURCE button to exit the menu mode.