User Manual

7" TFT LCD MONITOR
10
Menu Options
1. Picture (Screen Setup)
Picture setting
■ Press the MENU button once to display the Picture setting menu.
■ Press the ENTER button to highlight the Brightness setting.
■ Press the UP or DOWN button to highlight the setting that needs to be
adjusted.
Brightness
■ Press ENTER button to select the Brightness setting.
■ Press the UP or DOWN button to adjust the Brightness value between 0
and 100.
■ Press ENTER button again to save and return to the Picture setting menu;
now highlight another Picture setting to be adjusted. To select a different
setting (Contrast, Saturation, Tint, Color Temp*) use the UP / DOWN
buttons. Follow the same procedure to set the other values.
■ Keep pressing the MENU button to cycle through the main menu options.
■ Press the SOURCE button to exit the menu mode.
* N.B.: Color Temp can be set to 9300, 7500, 6500, 5400 or USER RGB
values.
2. Audio (Audio Indicator)
■ Press the MENU button twice to display the Audio setting menu.
■ Press the ENTER button to highlight the Indicator setting.
■ Press the ENTER button again to toggle the on screen audio indicator
ON/OFF.
■ Keep pressing the MENU button to cycle through the main menu options.
■ Press the SOURCE button to exit the menu mode.
3. Function (Center Mark, Safety Zone)
■ Press the MENU button three times to display the Function. Settings
menu.
Center Mark
■ Press the ENTER button to highlight the Center Mark setting.
■ Press the ENTER button to toggle the on screen Center Mark ON/OFF.
Safety Zone
■ Press the UP or DOWN button to highlight the Safety Zone setting.
■ Keep pressing the ENTER button to cycle through the values 80%, 90%
or OFF.
■ Press the UP or DOWN button to exit the Safety Zone setting. To select
a different setting (4:3 Screen, Cinema Zone) use the UP or DOWN
buttons. Follow the same procedure to set the next setting.
■ Keep pressing the MENU button to cycle through the main menu options.
■ Press the SOURCE button to exit the menu mode.