Quick-Start Guide

FORMAT MEDIA

Format Media will remove all bins from the hard drive.

Press the (MENU) button into the menu mode

Press the (ENTER) button into the TOOL menu

Press the

(NEXT) button to select the FORMAT MEDIA menu

Press the (ENTER) button into the FORMAT MEDIA menu

Press the (FORMAT) Button to erase the selected bin - The bin duration will return to 00:00:00:00

After a few seconds the HDR-60 will return to normal.

UPRGRADE FIRMWARE

Update the HDR-60 firmware step:

1. Select the FORMAT MEDIA to format 2.5’’ HDD

2. Turn off the HDR-60 power

3. Move out the 2.5''HDD of HDR-60

4. Connect it to your computer

5. Rename FW file to “flash.bin”

6. Copy the firmware update file to the root directory, level where all bin folders appear.

7. Insert the 2.5’’ HDD in the HDR-60 and select the UPGRADE FIRMWARE option and follow the instructions

WARNING: Wait until you see then reboot system.

Press the

(MENU) button into the menu mode

Press the (ENTER) button into the TOOL menu

Press the

(NEXT) button to select the UPRGRADE FIRMWARE menu

Press the (ENTER) button to upgrade the HDR-60 firmware

UPGRADE FINISH!

PLEASE POWER CYCLE!