Quick-Start Guide

Powering On

Connect the HDR-60 power supply to the DC In socket. Ensure the power cable is connected to a suitable mains

socket.

Press the Power Button until it lights up

The LCD display panel should show the bin display appear and the HDR-60 is ready

MENU Key Function

TOOL

FIRMWARE REVISION

Display the Rev No. and Firmware Revision, CODEC, HOST REV, of the HDR-60

Press the (MENU) button into the menu mode

Press the (ENTER) button into the TOOL menu

Press the (NEXT) button to select the FIRMWARE REVISION menu

Press the

(ENTER) button into the FIRMWARE REVISION menu

Press the (NEXT) button to see other Firmware Revision.

ERASE THIS BIN

ERASE THIS BIN is used for deleting individual bins from the HDR-60.

Press the

(MENU) button into the menu mode

Press the (ENTER) button into the TOOL menu

Press the

(ENTER) button into the ERASE THIS BIN menu

Press the

(ENTER) button to erase the selected bin - The bin duration will return to 00:00:00:00