Instruction manual

66
7). Internal Chroma- Key ON/OFF control
To turn Off/On internal Chroma-key function for application of EXT SDI CG overlay.
8). Consistency A/V LED for T-Bar Cross Effect.
Video LED on and Audio Off: Video effect only
Video and Audio LED both On: Video and Audio effect.
9). Instant Reset for individual Video Input channel. (This function is Vin firmware related)
This feature is very useful during field application as an alternative to reset a defective channel instantly.
The procedure to reset the selected video channel as below:
.
S1. Click on SETUP button to
cycle 4 channels LED on.
S2. Select Effect: “02” and “Enter”
S3
. Click on the “SPD” key to
toggle on speed LED display
“Y” (Enable Chroma-Key) or
“N”(Disable Chroma-Key)
S4. Click on SETUP button to exit
and save the setting condition.
Push and Hold on button A for 2 seconds to reset Video channel A
Step 1. Click on the SETUP button to enable the Input
Format selection of A, B, C or D
Step 2. Push and hold on the SUB-SOURCE buttons of
A, B, C or D for two seconds, it will reset the
selected channel accordingly