Instruction manual

49
These set ups can be modified for use in a lot of different situations.
Please let us know how you are using your SE-800, and take a look at the web site to see how others are
using their SE-800s!
Troubleshooting
No power
No image at output
Audio clipping
Audio or video feedback
Frozen image at output
Image distortions
l No power
1. Check the contact of power connector.
2. Move the SE-800 to a cooler location and allow the unit time to cool off before powering on again.
l No image at output
1. Incorrect video input format selection
2. Turn off the SDI overlay function if there is no SDI overlay device connected.
l Audio clipping
1. Audio input level is too high.
2. Incorrect calibration of audio input level.
l Frozen image at output
1. The Freeze function was activated
2. The video input source is no longer valid, or playback has stopped.
l Image distortion
1. The video input level is too high
2. The video quality is poor from video input source.