User`s manual

Utilities - DT6backup, DT6reload, DT6upgrade – Release 3.0
DT7backup, DT7reload
02/04/10 Datatek Applications Inc. 17
4.5.2 USAGE FOR BNS ENDPOINTS (COMMKIT/IP-COMMKIT CONNECTED SUPPORT HOST
PLATFORM)
Syntax: dt6upgrade [-v] [-d] [-V] [–p<pass>] [-P] -sa
<DialString> <filename>
Where:
-v Print Version of the Utility, then exit
-d Connection Debug (verbose) print enable
-V Abbreviated Debug (verbose) showing runtime progress of the utility
-p<pass> Password for logging into the DT product (Default is “initial”)
-P
As an alternative to supplying the –p<pass> option, -P causes dt6reload to prompt for
the unit password when it is needed. The password is not echoed.
-sa
(Required) Uses direct file transfer from the host to the unit. This requires the
minimum level or higher of the platform software.
<DialString> The BNS dialstring of the DT product console
<filename>
The filename including its directory string, if necessary, on this host containing the
new software package.
The –sa option must be given in the command line.