User`s manual
DT-6061 User's Manual - Platform (Build 16.0)
11/12/04
Datatek Applications Inc. 18
5 QUICK S TART C ONFIGURATION G UIDE
There are two levels of configuring a DT-6061: platform and application. This user manual covers
only the platform configuration and registration, and the installation and registration of the
application software. The commands and IP addressing associated with configuring an
application in an instance are described in the corresponding User Manual for that application.
Those manuals are available on the Datatek web site.
Below is a sample configuration sequence for a DT-6061 platform. All of these commands must
be entered via the serial console connected to the CON port of the DT-6061..
5.1 PLATFORM CONFIGURATION
The following is the command sequence for the initial configuration of the DT-6061.
<DT-6061> login passwd=initial ↵
↵↵
↵ enter "logged: in mode
User is logged in
<DT-6061> date 11:05:00 09/22/2003 ↵
↵↵
↵enter date & time (optional)
Fri Sep 22 11:05:00 EDT 2000
<DT-6061> ipaddr 135.17.59.240 ↵
↵↵
↵ enter IP address of DT-6061
You must reboot for this change to take effect
<DT-6061> submask 255.255.255.0 ↵
↵↵
↵ enter Subnet Mask of DT-6061
You must reboot for this change to take effect
<DT-6061> gateway 135.17.59.1 ↵
↵↵
↵ enter Gateway Address of DT-6061 if necessary
You must reboot for this change to take effect
<DT-6061> reboot ↵
↵↵
↵
5.2 PLATFORM SOFTWARE REGISTRATION
The software for this product must be registered in order to run applications. Please call Datatek
for a registration key. The key is based on the product code (DT-6061), the two-part software
release number (release.version)
1
of the platform software, and the hardware serial number
and MAC address of the DT-6061.
<DT-6061> register ↵
↵↵
↵
Product_Code=DT-6061
MAC=0.96.29.99.99.99
HW_SERNUM=99.99.99.99.99.99
Build_Number=16.0
Build_Date="Mon Feb 2 14:21:02 EST 2004"
Enter key: rxyuvw8s
Registration successful
5.3 APPLICATION INSTALLATION
This action requires that a host, acting as an ftp server, is present on a network that is accessible
by the DT-6061 install command.
<DT-6061> install ↵
↵↵
↵
application or package name ? NAME=tn3270 ↵
↵↵
↵
name of ftp download server ? SRV=<server name> ↵
↵↵
↵
login on download server ? ID=<user's login> ↵
↵↵
↵
1
Also called the Build Number.