User`s manual

DT-6061 User's Manual - Platform (Build 16.0)
11/12/04 Datatek Applications Inc. 17
Important! A modular cable with “SPECIAL WIRING” can be ordered using the table above or
built using the wiring diagrams provided in this manual in section
Error! Reference source not
found.
. The pin-outs for the 9-pin connector is shown in section 0.
4.2
CONFIGURATION NOTES
! Configure SAM, TY12 and MSM console connections as 9600 bps with 8 bits and no parity,
and use a DCE type cable.
! Configure SAM and MSM console connections as type “host” and as a “pap” (permanently
active port).
! Configure TY12 console connections as type “console”.