User`s manual

DT-6X60 User's Manual - Platform (Build 2.0)

9 APPENDIX C: TCP/UDP P

ORT

UMBERS

The DT-6X60 uses the following TCP and UDP ports. These ports cannot be changed by

configuring them.

Protocol Port Number Purpose

UDP 161

Used by SNMP managers to set MIB values or get MIB data from

the DT-6X60

UDP 162

Used by the DT-6X60 SNMP agent for sending Traps to the

designated SNMP manager

TCP 1023

The telnet console port for the platform. Duplicates the input and

output of the hard-wired serial console.

TCP 1024-5000

Ports dynamically assigned by the DT-6X60 for outgoing calls. Do

NOT use or assign these ports.

UDP 9998 Active/Standby communication port

UDP 9999 Dtproduct - obsolete

TCP 10001-10048

The telnet console port for the application installed in instances 1

through 30 in a DT-6160 or 1 through 48 in a DT-6260.

TCP 30000-39599 Ports assigned in configuring various DT-6XXX applications

06/07/07

Datatek Applications Inc. 51

Table 9: TCP/UDP Port Numbers Used