User`s manual

DT-6061 User's Manual - Platform (Build 17.1)
12/14/09 Datatek Applications Inc. 9
1.1 M ULTIPLE A PPLICATION S UPPORT
The DT-6061 can support one or more different types of applications and up to 30 instances of
each application with a few exceptions. An application instance can be described as a unit of
configuration parameters as a specific DT-6061 application defines them. In other words, each
instance of an application is a completely separate process where all aspects of the
configuration and operation of the application are performed entirely within that process. The
configuration of an application is accomplished via the use of a telnet console.
Currently the DT-6061 is factory configured to order to support 1 to 5 application types. The table
below shows the list of the currently available applications.
Table 1: DT-6XXX Applications
Application Name Description
IP-B2APRT
Allows a BiSync host to print to an ASCII printer
located on an IP network
IP-BHI
Allows a legacy BiSync host to connect to an IP
network
IP-E2A
Allows E2A telemetry ports of a network element to
communicate over IP networks to OS hosts and
eliminates the need for digital bridging
IP-FANOUT
Allows diverse LAN segments to be connected over
a WAN as a cohesive IP network
IP-LTCN
Allows legacy telephone line test equipment to
interface with IP-based OS hosts
IP-SLM
Allows specialized (B)X.25 telephone switch
interfaces and other network elements to
communicate over IP networks with OS hosts
IP-SPOOL
Eliminates underutilized physical printers by
providing logical printers and print spooling per
RFC1179 to a physical, shared print resource
anywhere in an IP network
IP-VCON
Takes over the mundane task of monitoring a large
and varied set of device consoles autonomously,
collects console messages, and intervenes
automatically when necessary according to user-
defined scripts
MULTIMATE
Eliminates the wasteful expense of external PADs
and port-sharing devices. In addition, strategies for
redundancy and disaster recovery are available
through the judicious use of MultiMate.
ONSITE
Generates ASCII alarms based on network alarm
grid open and closed contacts
TN3270
Allows a 3270 client on an IP network to access a
BiSync host