User`s manual

DT-6061 User's Manual - Platform (Build 17.1)
12/14/09 Datatek Applications Inc. 66
12 APPENDIX F: DT-6061 S PECIFICATIONS
Note: Shielded cables must be used in order to maintain compliance with EMC
requirements.
12.1 CON (C ONSOLE )
A standard interface that uses binary data interchange between DTE and DCE. The RS-232C
interface uses an RJ45 connector and operates at 9600 bits per second (bps).
12.2 RS-232/V.35
12.2.1 RS-232C
A standard interface that uses binary data interchange between DTE and DCE. The RS232-C
interface uses a 25-pin (DB25) connector and up to 21 signal leads, and operates at data rates
from 75 to 19200 bits per second (bps).
12.2.2 V.35
A standard interface used for interface and trunk modules. The V.35 interface uses a 34-pin
connector and operates at data rates up to 2.048Mbps.
12.3 10-B ASE -T LAN
Eight-pin, 10BaseT modular connector for a 10 Mbps baseband CSMA/CD local area network.
12.4 DSU
This interface uses an industry standard RJ48C connector. The interface may be used for T1
(1.544 MHz) or E1 (2.048 MHz)
12.5 P HYSICAL D IMENSIONS
DT-6061: L= 16.9 x W=8.77 x D=1.72
12.6 E NVIRONMENTAL O PERATING R ANGE
Operating Temperature: 5° to 40°C (41°F to 104°F) per GR-63-CORE.
Operating Humidity: 5% to 85%
Altitude:
From 60 m (197 ft.) below sea level to 1800 m (5905 ft)
above sea level
Table 10: Environmental Operating Ranges