User`s manual

DT-6061 User's Manual - Platform (Build 17.1)
12/14/09 Datatek Applications Inc. 53
9 APPENDIX C: TCP/UDP P ORT N UMBERS
The DT-6061 uses the following TCP and UDP ports. These ports cannot be changed by
configuring them.
Protocol Port Number Purpose
UDP 161
Used by SNMP managers to set MIB values or get MIB data from
the DT-6061
UDP 162
Used by the DT-6061 SNMP agent for sending Traps to the
designated SNMP manager
TCP 1023
The telnet console port for the platform. Duplicates the input and
output of the hard-wired serial console.
TCP 1024-5000
Ports dynamically assigned by the DT-6061 for outgoing calls. Do
NOT use or assign these ports.
UDP 9998 Active/Standby communication port
UDP 9999 DTproduct - obsolete
TCP 10001-10030
The telnet console port for the application installed in instances 1
through 30 in a DT-6061.
TCP 30000-35800 Ports assigned in configuring various DT-6XXX applications
Table 9: TCP/UDP Port Numbers Used