User`s manual

DT-6061 User's Manual - Platform (Build 17.1)
12/14/09 Datatek Applications Inc. 50
8 APPENDIX B: SNMP MIB VARIABLE
D ATABASE AND T RAPS
The DT-6XXX SNMP V1 agent supports a multitude of SNMP MIB variables accessible by get
and set operations and SNMP
trap operations,
One or more SNMP managers may query the SNMP agent.
Command Operational Result
Get Requests the values of one or more Management Information Base (MIB)
variables.
GetNext Enables MIB variables to be read sequentially, one variable at a time.
Set Permits one or more MIB values to be updated.
GetResponse Used to respond to a Get, GetNext, or Set.
Trap Indicates the occurrence of a predefined condition.
Table 6: SNMP Commands and Action
8.1 SNMP MIB V ARIABLE D ATABASE
RO = Read Only Variable
R/W = Read Variable / Write Variable
SIV = Storage is Volatile (this applies to enableAuthenTraps
Table 7: SNMP MIB-II Variables
MIB Variable
Number
Name MIB Console Equivalent Access Notes
1.3.6.1.2.1.1.1.0 SysDescr MIB-II Banner Message RO
1.3.6.1.2.1.1.2.0 SysObjectID MIB-II None RO
1.3.6.1.2.1.1.3.0 SysUpTime MIB-II None RO
1.3.6.1.2.1.1.4.0 SysContact MIB-II None R/W
1.3.6.1.2.1.1.5.0 SysName MIB-II None R/W
1.3.6.1.2.1.1.6.0 SysLocation MIB-II None R/W
1.3.6.1.2.1.1.7.0 SysServices MIB-II None RO
1.3.6.1.2.1.4.1.0 IpForwarding MIB-II None RO
1.3.6.1.2.1.4.2.0 IpDefaultTTL MIB-II None RO
1.3.6.1.2.1.4.3.0 IpInReceives MIB-II Nbr of Ethernet Pkts Rcvd RO
1.3.6.1.2.1.4.4.0 IpInHdrErrors MIB-II Nbr of Packets w/Header Errs RO