User`s manual

DT-6061 User's Manual - Platform (Build 17.1)
12/14/09 Datatek Applications Inc. 12
2.4 10B ASE -T LAN
These two interfaces require a standard RJ45 terminated Category 5, twisted pair, data cable.
They connect to a 10BaseT hub or Router on the local LAN segment. The left connector is
labeled LAN2 and the right one LAN1. The LAN2 connector is not currently used.
2.5 LED S
The DT-6061 faceplate contains light emitting diodes (LEDs) used to report DT-6061 activity and
behavior.
LED Function LED Color LED Description
PWR Green Unit Power Indicator
ALARM Red Reset Indicator & General Failure Indicator
LNK Green 10 Base-T Link Indicator
COL Red 10 Base-T Collision Indicator
RX Yellow 10 Base-T Receive Packet Indicator
TX Yellow 10 Base-T Transmit Packet Indicator
DSU Red LOS Indicator
Table 2: Faceplate LEDS
2.6 RS-232 / V.35
Through a DB25, RS-530 connector the DT-6061 supports two, software selectable, device
interfaces (V.35 and RS-232C). This connector is not currently used.
2.7 DSU
The DT-6061 DSU interface uses an industry standard RJ48C connector. This connector is not
currently used.