User`s manual

Supplement to DT-6061 User's Manual (Platform) for

IP -LTCN Application

04/23/02

Datatek Applications Inc.

THIS EQUIPMENT IS TO BE INSTALLED ONLY IN RESTRICTED ACCESS AREAS ON

BUSINESS AND CUSTOMER PREMISES APPLICATIONS IN ACCORDANCE WITH

ARTICLES 110-16, 110-17, AND 110-18 OF THE NATIONAL ELECTRICAL CODE,

ANSI/NFPA NO. 70. OTHER INSTALLATIONS EXEMPT FROM THE ENFORCEMENT OF

THE NATIONAL ELECTRICAL CODE MAY BE ENGINEERED ACCORDING TO THE

ACCEPTED PRACTICES OF THE LOCAL TELECOMMUNICATIONS UTILITY.

! For a unit equipped with an AC Wall Plug-In Unit, read and understand the following:

! Use only the K’TRON, Model KA-52A Wall Plug-In Unit shipped with this product.

! Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or

aerosol cleaners. Use a damp cloth for cleaning.

! Do not staple or otherwise attach the power supply cord to the building surfaces.

! Do not overload wall outlets and extension cords as this can result in the risk of fire or electric

shock.

! The socket outlet shall be installed near the equipment and shall be readily accessible.

! The Wall Plug-In unit may be equipped with a three-wire grounding type plug, a plug having a

third (grounding) pin. This plug is intended to fit only into a grounding type power outlet. Do

not defeat the safety purpose of the grounding type plug.

! Do not allow anything to rest on the power cord. Do not locate this product where persons

walking on it may abuse the cord.

! Unplug this product from the wall outlet and refer servicing to qualified service personnel

under the following conditions:

a) When the powers supply cord or plug is damaged or frayed.

b) If liquid has been spilled into the product.

c) If the product has been exposed to rain or water.

d) If the product does not operate normally by following the operating instructions.

Adjust only those controls that are covered by the operating instructions because

improper adjustment of other controls may result in damage and will often require

extensive work by qualified technician to restore the product to normal operation.

e) If the product has been dropped or the cabinet has been damaged.

f) If the product exhibits a distinct change in performance.

SAVE THESE INSTRUCTIONS