Supplement to DT-6061 User's Manual Platform For IP-LTCN Application Issue 1 721 Route 202-206 Bridgewater, NJ 08807 fax: 908.218.1736 phone: 908.218.0500 email: sales@datatekcorp.com http://www.datatekcorp.
Supplement to DT-6061 User's Manual (Platform) for IP -LTCN Application CONTENTS IMPORTANT SAFETY INSTRUCTIONS ........................................................................................ 3 1 2 INTRODUCTION..................................................................................................................... 5 1.1 APPLICATIONS AND INSTANCES ......................................................................................... 6 1.2 HIGH AVAILABILITY OPTION ................
Supplement to DT-6061 User's Manual (Platform) for IP -LTCN Application IMPORTANT SAFETY INSTRUCTIONS ! The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
Supplement to DT-6061 User's Manual (Platform) for IP -LTCN Application THIS EQUIPMENT IS TO BE INSTALLED ONLY IN RESTRICTED ACCESS AREAS ON BUSINESS AND CUSTOMER PREMISES APPLICATIONS IN ACCORDANCE WITH ARTICLES 110-16, 110-17, AND 110-18 OF THE NATIONAL ELECTRICAL CODE, ANSI/NFPA NO. 70. OTHER INSTALLATIONS EXEMPT FROM THE ENFORCEMENT OF THE NATIONAL ELECTRICAL CODE MAY BE ENGINEERED ACCORDING TO THE ACCEPTED PRACTICES OF THE LOCAL TELECOMMUNICATIONS UTILITY.
Supplement to DT-6061 User's Manual (Platform) for IP -LTCN Application 1 INTRODUCTION The DT-6061 (Embedded Network Processor) is a network applications computer that applies customer specific protocol operations (protocol translation and termination) of network connections that require such a function in a distributed network. The DT-6061 supports a multitude of applications, and may support combinations of these applications simultaneously.
Supplement to DT-6061 User's Manual (Platform) for IP -LTCN Application supplement provides specific changes and additions to the “DT-6061 User’s Manual (Platform)” that apply to the IP-LTCN application on the DT-6061. The complete description, installation procedures, commands, etc for the DT-6061 platform are contained in the “DT-6061 User’s Manual (Platform)” to which the user should refer for more detail. This supplement is intended to be a “cookbook” for the IP-LTCN application administrators. 1.
Supplement to DT-6061 User's Manual (Platform) for IP -LTCN Application 2.2 USER APPLICATION INSTALLATION This action requires that a host, acting as an ftp server, is present on a network that is accessible by the DT-6061 install command. The current version of the IP-LTCN application can be downloaded to the ftp server from the Datatek Applications Inc.’s web site www.datatekcorp.com using the instructions which are accessed by clicking on the “software download” link on the web site.
Supplement to DT-6061 User's Manual (Platform) for IP -LTCN Application 2.3 ASSIGNMENT OF THE IP-LTCN APPLICATION TO INSTANCE 1 As stated earlier, the IP-LTCN application must be the only application installed on the DT-6061 and must be assigned to instance 1.
Supplement to DT-6061 User's Manual (Platform) for IP -LTCN Application • The other DT-6061 is already active, so this standby updates its internal time-of-day from the active and continues to poll. • The other DT-6061 is also in standby, so a brief negotiation follows, and one of them becomes active, while the other remains in standby. The standby periodically polls the active.
Supplement to DT-6061 User's Manual (Platform) for IP -LTCN Application 3 UPDATED APPLICATION INSTALLATI ON From time to time as needed, new application or DT-6061 platform software is released. The recommended procedure for installing new application or platform software is to use the install command on both the active and standby DT-6061. It doesn't matter which DT-6061 is updated first. However, it is recommended that the installation be performed on the standby system first.
Supplement to DT-6061 User's Manual (Platform) for IP -LTCN Application The help command at the standby console shows only the commands that ARE allowed. The date command at the standby console may not be used to change the date. The standby receives the current time from the active. 6 HARDWARE WARRANTY The warranty period for hardware shall be one year from the date of delivery. Replacements and repairs are guaranteed for the longer of the remaining original warranty period or 90 days.
Supplement to DT-6061 User's Manual (Platform) for IP -LTCN Application 7.3 SOFTWARE SUPPORT SOFTWARE support is not provided by Manufacturer, or its affiliates or subsidiaries separate from the HARDWARE. For SOFTWARE support, please contact your supplier of the HARDWARE. Should you have any questions concerning this LICENSE, or if you desire to contact Manufacturer for any other reason, please refer to the address provided in the documentation for the HARDWARE. 7.
Supplement to DT-6061 User's Manual (Platform) for IP -LTCN Application If you acquired the SOFTWARE in the United States of America, this Software License is governed by the laws of the State of New Jersey, excluding its choice of laws provisions. If you acquired the SOFTWARE outside the United States of America, local law may apply.