Instructions

UM-0085-B09 DT80 Range User Manual Page 250
RG
Figure 102: PPP Modem Configuration for direct cable connection (Windows XP)
For a direct RS232 cable connection, ensure that the Maximum speed setting is set to the configured baud rate
the DT80 serial port in use. For a USB connection this setting is irrelevant. Check that the other settings are as
shown in Figure 102 , then press OK.
4. On Windows XP, select the Networking tab, then press Settings. On Windows Vista/Windows 7, select the
Options tab then press PPP Settings. This will display the PPP Settings dialog.
Figure 103: PPP Settings
Set the options as shown. In particular, disable the Enable software compression option, then press OK. This
will reduce the time taken to establish a PPP connection.
5. On the Networking tab, select the Internet Protocol option (Internet Protocol Version 4 on Windows 7) and
then click Properties.
6. Click Advanced to display the Advanced TCP/IP Settings dialog.